Manfred Weber
Metra Mess- und Frequenztechnik in Radebeul e.K.
Since 1954

Deutsche Seiten Menu

Software Download


VibroMetra PC Vibration Measuring System
Vibration Monitor M14
8 Channel IEPE Conditioner M208A
Charge / IEPE Amplifier Racks M72R8 and M72S8
Vibration Meters VM22 / VM24 / VM25
Vibration Meter VM23
Human Vibration Meter VM30-H
Human Vibration Analyzer VM31
Vibration Meter for Wind Energy Plants VM30-W
Triaxial Vibration Monitor VM40A/B
Triaxial Vibration Monitor VM40C
Vibration Calibrating Systems VC100 / VC110 / VC120
Vibration Switches VS10 / VS11 / VS12
TEDS Support


VibroMetra PC Vibration Measuring System

VibroMetra-Software  ↷ .exe Version 1.9 40 MB
This software is fully operational after registration. It can be tested without registration in Trainer mode with simulated sensor signals (see online help).

Device driver  ↷ .zip 52 kB
M302 Device driver for Windows 32/64 bit

Device driver  ↷ .zip 52 kB
M312 Device driver for Windows 32/64 bit

Device driver  ↷ .zip 286 kB
VM-RADIO and VM-ADAM Device driver for Windows 32/64 Bit

Firmware update  ↷ .exe Version 2.0.420
M312 Firmware Updater


Vibration Monitor M14

USB software for setup and measurement  ↷ .zip 206 MB
for Windows PCs, LabView 2014 based

USB-Device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmware update:  ↷ .zip 40 kB
  1. Download the zipped Firmware file m14.hex to your PC in a folder of your choice.
  2. Install Firmware Updater on your PC and start it.
  3. Connect the M14 with supply voltage to a USB port.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the M14. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "M14" and the firmware file m14.hex.
  7. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, reconnect the VS1x and start again at point 3.
Version history

8 Channel IEPE Conditioner M208A

M208A Control Center  ↷ .msi 8 MB
M208A operating and measuring software for Windows PCs

Device driver  ↷ .zip 1,3 MB
for USB / RS-232 interface cable Windows 32/64 bit

Charge / IEPE Amplifier Racks M72R8 and M72S8

Setup Tool  ↷ .zip 109 MB
for the rack cases M72R8 and M72S8
This software package includes the LabView 2014 Runtime Engine.
The LabView project files are provided on demand.

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Vibration Meters VM22 / VM24 / VM25

VM2x Measurement Database  ↷ .zip 82 MB
PC software for the management of VM2x measuring data and report generation (operable in test mode, license required for use with a VM2x)
Notice for users of 64 bit systems: Please install, in addition to VM2x Measurement Database, the 64 bit version of  SQL Server Compact 3.5 SP2 which you can download under this link: http://www.microsoft.com/en-us/download/details.aspx?id=5783

USB device driver  ↷ .inf 2,2 kB
for VM2x versions 001.001, 001.002 and 001.003 Windows XP/Vista/7, 32/64 bit

USB device driver  ↷ .zip 5,8 kB
for VM2x version 001.004 and higher Windows XP/Vista/7/8/10, 32/64 bit

Excel macro  ↷ .xlsm 812 kB
import of measuring data (VM2x) and FFT data (VM25  from Ver. 001.010) (500 kB)
Notice: The macro file runs on 32 and 64 bit systems. 64 bit versions of Microsoft Office are not supported.

Firmwarefile  ↷ .zip 105 kB
English / German / Spanish

Firmwarefile  ↷ .zip 105 kB
English / French / Italian

Firmware update:
Caution: Please backup your VMID and K(t) data of model VM25 before starting the update.
Important: Instruments of firmware version 001.001, 001.002 and 001.003 cannot be updated with this firmware. You can send them to us for a factory update. The firmware version of your VM2x is displayed on the instrument's start screen
  1. Download the zipped firmware file vm2x.hex with the desired languages to your PC in a folder of your choice.
  2. Install Firmware Updater on your PC and start it.
  3. Connect the VM2x to be updated to a USB port and switch it on.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the VM2x. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "VM2x" and the firmware file vm2x.hex.
  7. Select in the VM2x menu "Device settings" and "Firmware update" and confirm two times by pressing OK. The VM2x is now ready for receiving firmware.
  8. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, start again at point 3.
Firmware version history


Schwingungsmessgerät VM23

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmware update:  ↷ .zip 83 kB
  1. Download the zipped firmware file vm23.hex with the desired languages to your PC into a folder of your choice.
  2. Install Firmware Updater on your PC and start it.
  3. Connect the VM23 to be updated to a USB port and switch it on.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the VM23. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "VM23" and the firmware file vm23.hex.
  7. Select in the VM23 menu "Device settings" and "Firmware update" and confirm two times by pressing OK. The VM23 is now ready for receiving firmware.
  8. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, start again at point 3.
Firmware version history

Human Vibration Meter VM30-H

vm30_english.xls  ↷ .xls 173 kB
Ver. 2 Excel file with macro for data import from VM30-H into Excel, English, for VM30-H version 01.01.xxx.xxx

vm30-h_english.xls  ↷ .xls 194 kB
Ver. 3 Excel file with macro for data import from VM30-H into Excel, English, for VM30-H version 02.03.xxx.xxx

vm30.dll  ↷ .dll 60 kB
required for data import from VM30-H into Excel. Please copy to Windows system folder.

Device driver  ↷ .zip 1,3 MB
Device driver for USB / RS-232 interface cable, Windows 32/64 Bit

Human Vibration Analyzer VM31

Excel macro  ↷ .xlsm 2,3 MB
for the calculation of daily vibration exposure, data archiving and report generation
Notice: The macro file runs on 32 and 64 bit systems. 64 bit versions of Microsoft Office are not supported.

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmware update:   ↷ .zip 105 kB
  1. Download the zipped firmware file vm31.zip to your PC and unpack the enclosed file vm31.hex to a folder of your choice
  2. Install Firmware Updater on your PC and start it.
  3. Connect the VM31 to be updated to a USB port and switch it on. Make sure the USB device driver for Metra products was installed.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the VM31. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "VM31" and enter the path to the firmware file vm31.hex.
  7. Select in the VM31 menu "Device settings" and "Firmware update" and confirm two times by pressing OK. The VM31 is now ready for receiving firmware.
  8. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, start again at point 3.
Firmware version history

Triaxial Vibration Monitor VM40A/B

PC-Software  ↷ .msi 53 MB
for data downloading, archiving, trending and report generation (Windows XP/Vista/7/8/10, 32/64 Bit, approx. 60 MB)
Notice for users of 64 bit systems: Please install also the 64 bit version of  SQL Server Compact 3.5 SP2 which you can download under this link: http://www.microsoft.com/en-us/download/details.aspx?id=5783

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmware update:  ↷ .zip 108 kB
  1. Download the zipped firmware file vm40.zip to your PC and unpack the enclosed file vm40.hex to a folder of your choice
  2. Install Firmware Updater on your PC and start it.
  3. Connect the VM40A/B to a USB port and switch it on. Make sure the USB device driver for Metra products was installed.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the VM40A/B. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "VM40A/B" and enter the path to the firmware file vm40.hex.
  7. Select in the VM40A/B menu "Device settings" and "Firmware update" and confirm two times by pressing OK. The VM40A/B is now ready for receiving firmware.
  8. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, start again at point 3.
Notice: Please erase the data memory after a firmware update.
Firmware version history

Triaxial Vibration Monitor VM40C

PC Software  ↷ .msi 60 MB
for data downloading, archiving, trending and report generation (Windows XP/Vista/7/8/10, 32/64 Bit, approx. 60 MB)
Notice for users of 64 bit systems: Please install also the 64 bit version of  SQL Server Compact 3.5 SP2 which you can download under this link: http://www.microsoft.com/en-us/download/details.aspx?id=5783

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmware update:  ↷ .zip 111 kB
  1. Download the zipped firmware file vm40c.zip to your PC and unpack the enclosed file vm40c.hex to a folder of your choice
  2. Install Firmware Updater on your PC and start it.
  3. Connect the VM40C to a USB port and switch it on. Make sure the USB device driver for Metra products was installed.
  4. Install the USB device driver, if not done yet (usually not necessary under Windows 10).
  5. Select in Firmware Updater the USB COM port assigned to the VM40C. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  6. Select in Firmware Updater the instrument "VM40C" and enter the path to the firmware file vm40.hex.
  7. Select in the VM40C menu "Device settings" and "Firmware update" and confirm two times by pressing OK. The VM40C is now ready for receiving firmware.
  8. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, start again at point 3.
Notice: Please erase the data memory after a firmware update.

Firmware version history

Vibration Meter for Wind Energy Plants VM30-W

vm30-w_english.xls  ↷ .xls 75 kB
Excel file with macro for data import from VM30-W into Excel, English version

vm30.dll  ↷ .dll 60 kB
required for data import from VM30-W into Excel. Please copy to Windows system folder.

Device driver  ↷ .zip 1,3 MB
Device driver for USB / RS-232 interface cable, Windows 32/64 Bit

Calibrating Systems VC100 / VC110 / VC120

PC-Software  ↷ .msi 31 MB
VC1xxCDB for VC110 and VC120 (for Windows XP/Vista/7/8, approx. 30 MB)
Notice for users of 64 bit systems: Please install also the 64 bit version of  SQL Server Compact 3.5 SP2 which you can download under this link: http://www.microsoft.com/en-us/download/details.aspx?id=5783
VC120: software license required (included in standard delivery)
VC110: USB/RS-232 converter Mod. VCUSB and software license required

PC-Software  ↷ .zip Version 3.0 2,4 MB
for Vibration Calibrating System VC110 up to Windows XP

PC-Software  ↷ .zip Version 1.07 1,4MB
for Vibration Calibrating System VC100 up to Windows XP

VCUSB device driver  ↷ .zip Version 1.07 7,5 kB
Device driver for Windows 32/64 bit
Installation instructions

Vibration Switches VS10 / VS11 / VS12

PC-Software  ↷ .zip 109 MB
for setup and measurement, Windows XP/Vista/7/8/10, approx. 108 MB, ZIP file
This software package includes the LabView 2014 Runtime Engine.

LabView project files  ↷ .zip 769 kB
of the PC software for setup and measurementg

USB device driver  ↷ .zip 6 kB
for Windows XP/Vista/7/8/10, 32/64 bit

Firmwareupdate:  ↷ .zip 35 kB

  1. Download the zipped firmware file vs1x.zip to your PC and unpack the enclosed file vs1x.hex to a folder of your choice
  2. Start the PC Software for setup and measurement, connect with the VS1x and click Firmware update. The old firmware will be deleted and the device is ready for new firmware data.
  3. Install Firmware Updater on your PC and start it.
  4. Select in Firmware Updater the USB COM port assigned to the VS1x. If you are not sure, check the number of "MSP-SA430 - CDC" in the Windows device manager.
  5. Select in Firmware Updater the instrument "VS1x" and enter the path to the firmware file vs1x.hex.
  6. Click in Firmware Updater the "Send" button. The update progress is indicated by a bar graph.
Should the update fail, reconnect the VS1x and start again at point 4.
Firmware version history

TEDS Support

TEDS-IO  ↷ .msi Version 1.3 4,9 MB
Windows program for reading and editing (only test point ID and user text) the information stored in the TEDS memory (approx. 5 MB)
Notice: This program requires for operation a connected USB/1-Wire® adapter DS9490R from Maxim with installed driver.
The driver can be downloaded from http://www.maximintegrated.com/en/products/ibutton/software/tmex/download_drivers.cfm
After driver installation please run "Default 1-Wire Net.exe" from the start menu and perform automatic hardware detection. Once your adapter was detected it will remain stored as standard device for the communication between TEDS-IO and the sensor.
To work with the
DS9490R adapter it may also be necessary to install Microsoft Visual J# from http://www.microsoft.com/en-us/download/details.aspx?id=18084
For connecting a TEDS sensor to the 1-Wire® adapter you will need an interface cable. Please contact us if you need support.

Manufacturer Model Enumeration File  ↷ .xdl 708 B
This standard file includes the reference between the model numbers stored in the TEDS memory and Metra's actual model numbers.